Oki B4300 - Page 55

Configuration 53
Port-7 [Setup printer
port]-[Printer
type]
PS Set a printer
type when data
is sent to sjis/
euc logical
printer/
directory
Port-8 [Setup printer
port]-[TAB size
(char.)]
0—16 (8) Set tab size
when data is
sent to sjis/euc
logical printer/
directory. The
value 0 does
not convert
any tabs
Port-9 [Setup printer
port]-[Page width
(char.)]
0—255 (78) Set page width
when data is
sent to sjis/euc
logical printer/
directory. If
the width of
one line
exceeds this
value, Carriage
Return and
Line Feed are
inserted
automatically.
The value 0
means no
limitation of
the line width
Port-10 [Setup printer
port]-[Page
length(line)]
0—255 (66) Set page length
when data is
sent to sjis/euc
logical printer/
directory.
If the number
of lines
exceeds this
value, Form
Feed are
inserted
automatically.
The value 0
means no
limitation of
the line width
Port-11 [OKI Device
Setup]-[TCP/
IP]-[Use FTP/
LPD Banner]
[Setup printer
port]-[lpr/ftp
banner]
NO/YES Set banner
printing for
LPR/FTP
enabled/
disabled
STATUS-1 [Status]-
[Printer Status]
[Printer Status] [Display status]-
[prn1]
Display logical
port status
Ref. No. Admin
Manager
Web browser TELNET/
Diagnostic test
print
Available
options
Notes