Oki B4300 - Page 56

Configuration 54
STATUS-2 [Setup]-
[System Status]
[Network
Configuration]-
[Network Summary]
[Display status]-
[system]
Display system
status
Trap-1 [OKI Device
Setup]-
[SNMP]-
[Printer Trap
Setup . . . ]-
[Printer Trap
Community
Name]
[Network
Configuration]-
[SNMP Traps]-
[Trap Destination]-
[Printer Trap
Community Name]
[Setup printer
trap]-[Prn-Trap
community]
Any
alphanumeric
characters up to
77 characters.
(Default is
[public])
This
community
name is
assigned to
outgoing
printer status
traps such as
off-line, paper
out, etc.
Trap-2 [OKI Device
Setup]-
[SNMP]-
[Printer Trap
Setup . . .]-
[TCP#1—5]-
[Detail . . .]-
[Trap Enable]
[Network
Configuration]-
[SNMP Traps]-
[Trap Assignments]-
[Trap Enable]
[Setup printer
trap]-
[Setup TCP#1—5
trap] – [TCP#1—5
Trap enable]
ENABLE/
DISABLE
Set sending a
trap packet
enabled or
disabled for
each
destination.
Five IP address
destinations
can be set up
and one IPX
destination
Trap-3 [OKI Device
Setup]-
[SNMP]-
[Printer Trap
Setup . . .]-
[TCP#1—5]-
[Detail . . .]-
[On-line]
[Network
Configuration]-
[SNMP Traps]-
[Trap Assignments]-
[On-line]
[Setup printer
trap]-[Setup
TCP#1—5 trap] –
[On-line trap]
ENABLE/
DISABLE
Set sending a
trap, enabled
or disabled,
when the
printer turns to
ON-LINE
Trap-4 [OKI Device
Setup]-
[SNMP]-
[Printer Trap
Setup . . .]-
[TCP#1—5]-
[Detail . . .]-
[Off-line]
[Network
Configuration]-
[SNMP Traps]-
[Trap Assignments]-
[Off-line]
[Setup printer
trap]-[Setup
TCP#1—5 trap] –
[Off-line trap]
ENABLE/
DISABLE
Set sending a
trap, enabled
or disabled,
when the
printer turns to
OFF-LINE
Trap-5 [OKI Device
Setup]-
[SNMP]-
[Printer Trap
Setup . . .]-
[TCP#1—5]-
[Detail . . .]-
[Paper Out]
[Network
Configuration]-
[SNMP Traps]-
[Trap Assignments]-
[Paper Out]
[Setup printer
trap]-[Setup
TCP#1—5 trap] –
[Paper Out trap]
ENABLE/
DISABLE
Set sending a
trap, enabled
or disabled,
when paper is
out
Ref. No. Admin
Manager
Web browser TELNET/
Diagnostic test
print
Available
options
Notes