Oki C710 - Page 89

43856301TH Rev.3
88 /
Oki Data CONFIDENTIAL
4. Component replacement
EM-30L Class C
Spread MOLYKOTE (EM-30L) evenly on the patching parts.
Panmotoroil Class C
Use a brush to spread the pan motor oil evenly over the area
where the compression coil in torsion spring is made.
Cover-Assy.-Top
Plate-ss.Side RAy
Spring-Torsion-L
Spring-Torsion-R
-2 Printer Unit-PX741 Belt-Assy.
EM-30L Class A
Spread a small amount of MOLYKOTE (EM-30L) on the
inside of Bearing-TR (Belt) (total 8 places on both sides).
Roller-Transfer
EM-30L Class C
Spread MOLYKOTE (EM-30L) evenly on
the bearing surface. (on both sides)
EM-30L Class C
Spread MOLYKOTE (EM-30L) evenly on
the bearing surface. (on both sides)
EM-30L Class A
Spread a small amount of MOLYKOTE
(EM-30L) on the sliding surface.
Gear-Drive-Z36
Bearing-GSB
Bearing -TR(Belt)