About the Control Panel2-8
Scan settings
No. Indication Description
1 Data format Indicates the data format that is selected. For details
on selecting the data format, refer to “Selecting the
Data Format” on page 6-26.
2 Scan quality Indicates the scan quality that is selected. For details
on selecting the scan quality, refer to “Selecting the
Scan Quality Setting” on page 6-27.
3 Scan data desti-
nation
Indicates the specified destination for the scan data.
For details on specifying the destination of the data,
refer to “Specifying the Data Location” on page 6-10
and “Specifying the Destination Address (Scan to
E-mail/FTP/SMB)” on page 6-12.
" If no destination has been specified, SCAN
TO
appears.
4 Scan size Indicates the scan size that is selected. For details
on selecting the scan size, refer to “Setting the Scan
Size” on page 6-28.
1
2
3
4
5
6
7
8
9
Press /
Press /
To Next Page
Loading...
Need help?
General
