Configuration Menu Overview 2-39
LINE MONITOR
Setting
OFF / LOW / HIGH
Select the volume of the monitoring
sound of the transmission signal.
PSTN/PBX
Setting
PSTN / PBX
Select whether the connected tele-
phone wiring is a public switched tele-
phone network (PSTN) or a private
branch exchange (PBX).
For a PBX system, the prefix number
(outside line access number or exten-
sion number) can be specified.
TEL/FAX MODE
Setting
OFF/ON
This is to set whether to automatically
switch between telephone and fax in
receiving when a telephone is con-
nected to the machine.
When it's “ON”, the phone rings for
incoming calls and the machine auto-
matically receives fax.
When it is “OFF”, the machine returns
its answer tone to the other side for
incoming calls. The machine automati-
cally receives fax.
In order to use this function, “RX
MODE” of “FAX RX OPERATION”
needs to be set to “AUTO RX”.
RBT SIGNAL
TIME
Setting
5 / 10 / 15 / 20 /
25 / 30 / 60 / 90
/ 120 / 150 / 180
/ 240 sec.
This is to set the duration (second)
while the phone rings.
This setting is valid only when “TEL/
FAX MODE” is set to “ON”.
To Next Page
Loading...
Need help?
General
