Appendix A - Moving and transporting > 178
(i) Using the tool provided (2), lock the scanner at the two locations as shown.
(j) On the touch screen, press Close.
(k) Press the SETUP button on the control panel.
(l) On the touch screen, press Shutdown.
(m) On the touch screen, press Yes to confirm shutdown.
2. Turn off the MFP and disconnect or remove the following:
> Power cord, earth wire
> Printer cable
> Paper in the paper cassette
3. Move the MFP to the new location.
WARNING!
This product is heavy; a minimum of three people are required to
lift it safely.
NOTE
Be sure to unlock the scanner before turning on the MFP after transportation
and then disable the mirror carriage transfer mode.
To Next Page
Loading...
Need help?
General
