Getting started > 20
C
ONFIGURATION
TOOL
Installation of the Configuration tool is optional and can be found on the Driver/Utilities
DVD under the Utilities folder. Follow the on-screen instructions to complete the
Configuration tool installation.
The Configuration tool can discover devices over USB or network connections. This only
detects MC851+/MC861+/ES8451+/ES8461+ devices.
1. To search and install, select Tools > Register Device.
2. Highlight the required search result and when prompted click Yes.
The Configuration tool allows you to set up and manage your MFP. Refer to “Pre-
configuration information” on page 29 for detailed instructions.
NOTE
Network settings, such as LDAP configuration, cannot be saved to the MFP
from the Configuration Tool. For such settings, use the MFP operator panel or
MFP web page.
MFP
To Next Page
Loading...
Need help?
General
