Installing upgrades > 145
10. When the MFP is ready, print a configuration report as follows:
(a) Press Reports button (1) on the control panel.
(b) On the touch screen, touch the Configuration button (2).
(c) At the prompt, touch Yes to print the report.
11. Examine the first page of the configuration report.
Near the top of the page, above the horizontal line, you will see the current MFP
configuration. This list contains the figure for total memory size.
This should indicate the total memory now installed.
A
DDITIONAL
PAPER
TRAYS
AND
STORAGE
CABINET
Your machine can be upgraded with the following configurations:
> One additional paper tray and a tall storage cabinet
> Two additional paper trays and a short storage cabinet
WARNING!
Do NOT install any other configuration as this will result in the
machine being unstable.
To Next Page
Loading...
Need help?
General
