Operation > 87
F
AXING
B
ASIC
OPERATION
1. Place your document(s) with text face UP in the ADF or face DOWN on the glass.
2. Press the Fax button (1) on the control panel to prompt the Fax Ready screen.
3. Enter the destination fax number by either:
> typing in the number using the numeric keypad
> selecting the number from the speed dial list. Refer to “Assigning fax numbers to
the address book” on page 70 for details.
> pressing the Others button on the touch screen, then pressing Group Tx and
selecting from the group list
4. Using the touch screen (2), set your send properties as required. Refer to “Advanced
operation” on page 88 for details.
5. Press the Mono button (3) to start sending your document(s).
NOTE
If you wish to cancel faxing, press Stop (4) to abort the operation.
Fax transmissions are sent in black and white only.
To Next Page
Loading...
Need help?
General
