Oki MC860 User Manual

Troubleshooting > 154
Warning <%COLOR%> Toner Regional Mismatch The region ID of toner cartridge is not proper
to the distribution channel.
Warning Non Genuine <%COLOR%> Toner Toner cartridge RFID chip is not compatible.
Warning Error Postscript An error has been detected:
> The job has a grammatical error.
> The page is complicated, and VM was
used up.
Warning <%COLOR%> Image Drum Near Life Indicates image drum is near the end of it’s
life. Order replacement image drum(s).
Warning Fuser Unit Near Life Indicates fuser is near the end of it’s life.
Order replacement fuser.
Warning Belt Unit Near Life Indicates transfer belt is near the end of it’s
life. Order replacement transfer belt.
Warning Please Change Fuser Unit Notifies the life of the fuser. This is a warning
only.
Warning Please Change Belt Unit Notifies the life of the belt. This is a warning
only.
Warning <%COLOR%> Toner Empty Toner empty.
Warning status takes effect at Cover Open/
Close. Allows printing approx. 50 pages (A4
5% duty, density 5%).
Warning <%COLOR%> Toner Not Installed Notifies that the toner cartridge is not
installed.
Warning Please Install New <%COLOR%> Image
Drum
Notifies the life of the drum. This is a
warning only.
This warning appears when the cover is
opened and closed just after the drum life
error occurred.
Warning <%TRAY%> Empty Tray empty. Treated as a warning until
printing from that particular tray is required.
Warning File System is Write Protected An attempt to write in a read-only file.
This is a temporary warning, it remains until
the end of the job then disappears.
Warning Memory Overflow
Memory Overflow
Memory overflow occurred in the collate
print.
Warning Memory Overflow
Press <Stop> key
Memory overflow occurred during PC fax job
receiving.
Press the Stop button to return to the default
screen.
Warning Access Limitation Error
Deleted Unauthorized User Data
Indicates a job being cancelled due to no
print permit:
1. A job received from a user who is denied
printing.
2. A job received from a user who is denied
PC faxing.
Contact your network administrator for help.
Warning File Erasing Indicates that a secure file is being erased.
Warning Deleting encrypted job Indicates that an encrypted authentication
print job is being erased.
STATUS /
CODE
MESSAGE MEANING / ACTION

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb