Oki MC860 User Manual

Troubleshooting > 155
Warning Erased Data Full The log buffer was full and data was deleted.
Warning Expired Secure Job
Press <Stop> key
Indicates that an applicable job has been
automatically deleted as the retention period
for authentication printing has expired.
Warning Disk Use Failed <%FE_ERR%>
Press <Stop> key
A disk error has occurred.
Press the Stop button to clear the error.
%FS_ERR%:
0 - General error
1- Volume not available
3 - File not found
4 - No free file descriptors
5 - Invalid number of bytes
6 - File already exists
7 - Illegal name
8 - Cant del root
9 - Not file
10 - Not directory
11 - Not same volume
12 - Read only
13 - Root dir full
14 - Dir not empty
15 - Bad disk
16 - No label
17 - Invalid parameter
18 - No contig space
19 - Cant change root
20 - FD obsolete
21 - Deleted
22 - No block device
23 - Bad seek
24 - Internal error
25 - Write only
Warning <%PUFLASH%> Flash Error %PUFLASH%
PU
Tray 2
Tray 3
Duplex
Warning Received invalid data.
Press <Stop> key
A job has been deleted due to corrupt data
being detected by the integrity verification in
authentication printing.
Warning Received invalid data.
Press <Stop> key
An unsupported PDL command has been
received or a spool command has been
received without HDD.
Warning Remove the connected USB device.
Unsupported USB device is connected.
Indicates that an unsupported USB device is
connected.
This message will be displayed until the
unsupported USB device disconnected.
STATUS /
CODE
MESSAGE MEANING / ACTION

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb