Oki MC860 - Page 156

Troubleshooting > 156
Warning Job Log Writing Error
Press <Stop> key
The job log is not registered correctly due to
a disk access error when writing to the HDD.
Press the Stop button to clear the message
from the screen.
Error Install Paper
On %TRAY%
Please Set paper (%MEDIA_SIZE%)
To can cel
Select [Cancel].
Manual paper feed is required. Manually
insert the paper shown by %MEDIA_SIZE%.
%TRAY%
MPTray
Error Login Failed The PIN you entered is invalid.
Error Incorrect Password The password you entered is invalid.
Error There is no authority to <%Function%>. The PIN ID entered is not authorised to
perform the function:
%Function%
copy
copy in colour
fax
ScanToMail
ScanToUSB
ScanToLocalPC
ScanToNetworkPC
Error %TRAY% Media Mismatch
On %TRAY%
Please Set paper (%MEDIA_SIZE%/
%MEDIA_TYPE%)
To can cel
Select [Cancel].
The media size or both media size and media
type in the tray does not match the print
data.
Load mmm/ppp paper in tray.
%TRAY%
460: MPTray
461: Tray 1
462: Tray 2
463: Tray 3
Error Wait a Moment
Message Data Processing
Indicates that message data to be updated is
being processed.
Error Wait a Moment
Message Data Writing
Indicates that message data to be updated is
being written.
Error Power Off/On
Message Data Written OK
Indicates that message data has been
written successfully.
Error Check data
Message Data Write Error <%CODE%>
Indicates that message data to be updated
has failed.
%CODE% is a decimalvalue (one digit) and
represents the cause of failure:
1. FAIL: Other errors.
2. DATA_ERROR: Hash check error in data
reading/writing, or abnormal FLASH.
3. OVERFLOW: Downloading failure due to
FLASH memory full at starting or during
writing in a language file.
4. MEMORYFULL: Memory reservation
failure.
5. UNSUPPORTED_DATA: Downloading data
unsupported on the MFP.
STATUS /
CODE
MESSAGE MEANING / ACTION