Oki MC860 User Manual

Troubleshooting > 161
Error Check Data
Program Data Receive Error <%DLCODE%>
An error has occurred while your machine’s
network card firmware is being
reprogrammed.
%DLCODE%
1. File size error.
2. Check-sum error.
3. Invalid printer model number
4. Invalid module I/F version
5. Invalid FAT version
Error Wait a Moment
Program Data Writing
Your machine’s network card firmware is
being reprogrammed.
Error Power Off/On
Program Data Written OK
Your machine's network card firmware has
been reprogrammed successfully.
Error Check Data
Program Data Write Error <%DLCODE%>
An error has occurred while your machine’s
network card firmware is being
reprogrammed.
%DLCODE%
1. Memory allocation error
2. Download file error
3. Device allocation error
4. No device space
5. File writing failure
6. CU-F/W mismatch
Error Shutdown screen
&
Initializing screen
Controller unit is rebooting.
%CODE%:
0 … Reboot due to a reason other than the
following.
1 … Reboot due to PJLCommand.
2 … Reboot in accordance with a menu
change.
3 … Reboot due to quit operator of PostScript
Language.
4 … reboot by Network Utility (including
Web).
Error Shutdown in progress Your machine is shutting down.
Error Please turn off the Power. Shutdown complete.
Error Lamp Error. Please call service. Indicates that a lamp error error has
occured.
If the code still appears, contact your dealer.
Error Carriage Error Indicates that a mirror carriage error has
occured.
If the code still appears, contact your dealer.
Error USB Memory Full
Press <Stop> key
Indicates that file saving has failed due to
insufficient free space in the USB memory.
Error Writing Failed
Press <Stop> key
Indicates that file saving has failed; file is
write-protected.
Error USB Memory disconnected
Press <Stop> key
Indicates that the USB memory was
extracted and file saving has stopped.
STATUS /
CODE
MESSAGE MEANING / ACTION

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb