Oki MC860 User Manual

Troubleshooting > 160
Error
355
Please change Belt Unit: %ERRCODE% The transfer belt has reached the end of its
life and printing will stop.
Warning status takes effect at cover open/
close.
Replace transfer belt.
Error
348
Please check Fuser Unit: %ERRCODE% Open the top cover, check the fuser is
installed correctly and close the cover.
If the code still displays, replace the fuser.
Error
544
545
546
547
Please check %COLOR% Toner Cartridge:
%ERRCODE%
Toner cartridge lever has not been locked.
Lock into place securely.
Error 544: Y
Error 545: M
Error 546: C
Error 547: K
Error
340
341
342
343
Please check %COLOR% Image Drum Image drum not installed correctly.
Fit image drum.
Error 340: Y
Error 341: M
Error 342: C
Error 343: K
Error
320
Please check Fuser Unit Fuser unit is not installed correctly.
Fit fuser unit.
Error
330
Please check Belt Unit Belt unit is not installed correctly.
Fit belt unit.
Error
321
Power Off and Wait for a while Motor driver IC overheat detected.
Error
310
311
Cover Open
Close the flashing cover
Close the cover.
Error 310: Top cover
Error 311: Front cover
If the code still appears, contact your dealer.
Error
316
Cover Open
Close the flashing cover
Close the duplex cover.
If the code still appears, contact your dealer.
Error Cover Open
Close the flashing cover
Indicates that the ADF cover is open.
Indicates that the inter-lock cover on the
scanner unit is lifted up.
Note: If the inter-lock cover is lifted up
during scanning from the ADF, a document
jam message will display.
If the code still appears, contact your dealer.
Error Document jam!
Open & check the
flashing cover
Indicates a document jam has occurred
during scanning.
See “Clearing paper jams” .
If the code still appears, contact your dealer.
Error Wait a Moment
Program Data Receiving
Your machine's network card firmware is
being reprogrammed.
Error Wait a Moment
Program Data Received OK
Your machine's network card firmware is
being reprogrammed.
STATUS /
CODE
MESSAGE MEANING / ACTION

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb