Configuring your machine... > 38
Admin Setup
NOTE
The Admin Setup option is blocked by a password. Refer to “Pre-
configuration information” on page 27.
FEATURE OPTION DESCRIPTION
Copy Setup Default
Settings
Doc. Type Doc. Type:
Text, Text&Photo,
Photo, Extra Fine
Allows you to specify the type of
images on the document.
Removal for
Background & Show-
Through (sTHR):
Auto, OFF, 1(Low),
2, 3, 4, 5(High),
sTHR
Allows you to block out the colour
background of the image
(assuming document has a colour
background) - such that the
background colour is not printed.
Use Show-Through when copying
documents that are printed on
both sides (for example
newspaper). This function
removes the reverse image and
characters.
Density -3, -2, -1, 0, +1, +2,
+3
Adjust density
Darker: Enhance image sharpness
and colour.
Lighter: Reduce hue and colour.
Zoom Auto, 100% Specify zoom option.
Sort OFF, ON Specify how to output multiple-
page/multiple-copy jobs.
Margin OFF, ON Adjust the top and left margin
settings using the arrow buttons.
Front & Back input range:
-25~0~+25mm
EdgeErase OFF, ON Adjust the width settings using the
arrow buttons.
Input range: 05-50mm
EraseCentr OFF, ON Adjust the width settings using the
arrow buttons.
Input range: 01-50mm
DuplexCopy Copy Method:
OFF, 1->2 sides, 2-
>2 sides, 2->1 side
Doc. Direction:
Binding
Right&Left, Top
Allows you to define simplex or
duplex and the binding orientation.
Mixed Size OFF, ON Allows you to load originals of
same width but different length in
the ADF.
When enabled, the tray setting is
automatic, you cannot specify a
tray manually.