Oki ML1120 - Page 70

ML1120/ML1190 eco User’s Guide – Operating instructions > 70
Rear Feed
Menu
TOF
(continuous)
Select the reference
position for the TOF
position when auto
loading continuous
form paper from the
rear of the printer.
(Up to the
midsection of
characters in the
first line)
2.12 mm (1/12 in)
4.23 mm (2/12 in)
6.35 mm (3/12 in)
8.47 mm (4/12 in)
10.58 mm (5/12 in)
12.70 mm (6/12 in)
14.82 mm (7/12 in)
16.93 mm (8/12 in)
19.05 mm (9/12 in)
21.17 mm (10/12
in)
23.28 mm (11/12
in)
25.40 mm (12/12
in)
27.52 mm (13/12
in)
User top of form
Bottom Feed
Menu
Line Spacing Select line feed
pitch.
6 LPI
8 LPI
Skip Over
Perforation
Select whether to
skip over
perforation or not.
(When a skip over
perforation setup
command is
received, the
received command
is given priority.)
Yes (25.4 mm/1 in
No
MENU ITEM FUNTION SETTING