Oki PT390 - Page 91

90
No.
Item
Explanation
Detail setup item
11
BM SENSOR
- Specifies whether the BM sensor has been
installed.
Set "INSTALLED" only when the BM sensor
has been installed.
(This item is valid only for a device
specified to have the BM sensor
installed.)
INSTALLED
UNINSTALLED
12
BM CHEK WITH
CUT
- Specifies the cut operation initiated by the
BM sensor.
This setting is effective only when
"INSTALLED" has been set for BM SENSOR.
(This item is valid only for a device specified to
have the BM sensor installed.)
ENABLE
DISABLE
13
BUZZER
- Specifies whether to sound the buzzer at error
occurrence.
The buzzer can be sounded by a command
even if "DISABLE" is specified. (This item is
valid only for a device specified to have a
buzzer installed.)
DISABLE
ENABLE
14
RETURN TO UP
- Returns to the selection mode for the setup
group items.
-
15
RETURN TO
SETUP
MENU
- Returns to the setup mode menu.
-