Okolab LEO - Memory; Info

29
Figure 36. Power saving settings (a – b).
9.3.5.3 Memory
LEO stores up to 300 records. The memory shows how many records can be saved. Press the Memory icon
(see Figure 37 a) to check the remaining space available in memory (see Figure 37 b).
Note ► Before starting to measure, make sure that the space available on LEO memory is large enough to
store new records.
Figure 37. Memory check (a – b).
9.3.5.4 Info
Press the icon to access the System Information, as shown in Figure 38 a. This page contains the
information related to LEO serial number and version (see Figure 38 b). Click on the right arrow icon to move to
sensor module information panel.
a
b