3
3 Regulatory Compliance
3.1 Regulatory Statement
The product complies with the essential requirements of the LVD Directive 2014/35/EU and the EMC
Directive 2014/30/EU. The product has been tested and it complies with the requirements of the following
standards:
− European standard EN 61010-1: 2010 “Safety requirements for electrical equipment for
measurement, control and laboratory use”
− European standard EN 61326-1: 2013 “Electrical equipment for measurement, control and
laboratory use – EMC requirements”
The product meets the technical requirement of the Directive 2011/65/EU Restriction of the use of certain
hazardous substances (RoHS). The product has been tested according to European Standard EN 50581: 2012
“Technical documentation for the assessment of the electrical and electronic products with respect to the
restriction of hazardous substances”.
3.2 Waste Electrical and Electronic Equipment Directive (WEEE Directive)
The product must not be disposed as a general household waste. At the end of the product’s life, take the
product to a collection point designed for recovering and recycling of electrical and electronic devices.
In case of doubt, please return the product to Okolab s.r.l. for proper treatment.