OKPOS Optimus - Page 55

Application Programs
|
System Setup (BIOS) 55
3. On the following screen, enter the same password again and press the [Enter] key.
Conrm New Password
4. This will complete the password setup.
Changing the password
1. Go to Administrator Password (or User Password) when you want to change the password, and then press
the [Enter] key.
2. On the following screen, enter the current password and then press [Enter] key.
Enter Current Password
3. On the following screen, enter a new password and press the [Enter] key.
Create New Password
4. On the following screen, enter the same new password again and press the [Enter] key.
Conrm New Password
5. This will complete the password change.
Deleting the password
1. Go to Administrator Password (or User Password) when you want to delete the password, and then press
[Enter] key.
2. On the following screen, enter the current password and then press the [Enter] key.
Enter Current Password