Need help?Do you have a question about the Okuma OSP-U100M and is the answer not in the manual?
General| Brand | Okuma |
|---|---|
| Model | OSP-U100M |
| Category | Control Unit |
| Language | English |
Guidelines for installing the machine and power supply, including ambient conditions.
Essential safety guidelines for operating the machine, covering checks and procedures.
Safety measures for maintenance, part replacement, and troubleshooting.
Details basic functions of the OSP system, including hardware and software capabilities.
Procedure for powering up the NC unit and loading the system software.
Steps for safely shutting down the machine power and peripherals.
How to use the emergency stop switch to halt machine operation immediately.
Covers manual rapid, jog, and pulse handle feed operations for axes.
Details how to control spindle rotation, stop, release, and orientation.
Explains the establishment of correspondence and operation of the ATC system.
Step-by-step guide for manual data input operations.
Procedure for selecting and operating main programs using file designation.
Covers selection and operation of schedule programs.
Explains how to start operation and suspend it using slide hold.
Explains input/output of NC programs using MS-DOS floppy disks.
Covers input/output of part programs using OSP format floppy disks.
Explains how to set RS232C parameters for peripheral devices.
To Next Page
