Oldham iTrans User Manual

Operation iTrans Fixed Point Single/Dual Gas Monitor
5-12 iTrans User Manual (P/N: 77023554-1)
When the desired value is reached, press the “” key. If the value is not saved
before the time-out, the will go back to the Programming Mode.
5.6.7. Set System Time – Hour
The system’s clock hour setting is
designated with an “h” in the status
bit and current value next to it. To
change the hour, press the “” button
during the 10-second countdown. If
you do not press “” during the 10-
second countdown, the will
return to the Normal Operating Mode.
If you initiate the hours option, the
status bit will start to flash and the
hour can be changed by
using the “” and “” keys.
Figure 5-20. Setting System Time (Hour)
When the desired value is reached, press the “” key. If the value is not saved
before the time-out, the will go back to the Programming Mode.
5.6.8. Set System Time – Day
The system’s day of the month setting
is designated with a “d” in the status
bit and current value next to it. To
change the day, press the “” button
during the 10-second countdown. If
you do not press “” during the 10-
second countdown, the will
return to the Normal Operating Mode.
If you initiate the days option, the
status bit will start to flash and the
day can be changed by
using the “” and “” keys.
Figure 5-21. Setting System Date
When the desired value is reached, press the “” key. If the value is not saved
before the time-out, the will go back to the Programming Mode.

Oldham iTrans Specifications

General

Brand	Oldham
Model	iTrans
Category	Measuring Instruments
Language	English