iTrans Fixed Point Single/Dual Gas Monitor Operation
(P/N: 77023554-1) iTrans User Manual 5-17
After a calibration, the span reserve for the BBIR sensor is not available to
the end user.
The BBIR sensor’s digital address is set at the factory for Channel 1
operation (0x0F) or Channel 2 operation (0xF0). This digital address
cannot be changed in the field.
If you have any questions concerning the functionality of the BBIR sensor and the
, please contact Oldham at 1-713-559-9280 or
americas@oldhamgas.com.
To Next Page
Loading...
Need help?
General
