[Ethernet] (Admin Settings)5-6
[IP Address Filter] Specify IP address filtering settings.
[Access
Permission]
Specify access permissions for IP address filter-
ing.
Default: [Disable]
[Access
Rejection]
Specify access blocking for IP address filtering.
Default: [Disable]
[IPv6] Specify IPv6 settings.
[Enable] Select whether or not to enable IPv6.
Default: [Yes]
[Auto Setting] Select whether or not to enable the IPv6 auto set-
ting.
Default: [Enable]
[Link Local] Displays the link-local address.
[Global
Address]
Displays the global address.
[Gateway
Address]
Displays the gateway address.
[Netware] Select whether or not to enable NetWare.
Default: [Disable]
[AppleTalk] Select whether or not to enable AppleTalk.
Default: [Enable]
[Network Speed] Specify the transmission speed for the network
and the transmission method for bidirectional
transmission.
Default: [Auto]
[IEEE802.1X] Select whether or not to enable IEEE802.1X.
Default: [Disable]
[Binary Division] Select whether or not transmission data is divided.
Default: [OFF]
Item Description
To Next Page
Loading...
