Printing With NetWare3-2
Printing With NetWare
The printer controller supports the following environments.
Network Printing in a NetWare Environment
For Remote Printer Mode With NetWare 4.x Bindery
Emulation
"Before using bindery emulation, check that bindery emulation is compatible
with the NetWare server.
1 From a client computer, log on with Supervisor permissions to access the
NetWare server where the Pserver is registered.
2 Start up Pconsole.
3 From the [Available Options] list, select [Quick Setup], and then click the
[Enter] button.
4 Enter the appropriate names in the [Printer Server Name], [Printer Name],
[Print Queue Name], and [Print Queue Volume] fields, select [Other/
Unknown] from the [Printer type] field, and then save the specified set-
tings.
5 Click the [Esc] button to quit Pconsole.
6 Use the NetWare server console to load PSERVER.NLM.
"For queue user privileges, printer notification option, assignment of multiple
queues, and passwords, refer to the NetWare documentation, and specify
settings as necessary.
NetWare Version Protocol Used Emulation Service Mode
NetWare 4.x IPX Bindery/NDS Pserver/Nprinter
NetWare 5.x/6 IPX NDS Pserver/Nprinter
TCP/IP NDPS(lpr)
To Next Page
Loading...
Need help?
General
