Olivetti d-COLORMF3000 - TCP;IP Settings]

Configuring the Printer8-172
[TCP/IP Settings]
[TCP/IP Settings]
The [Network] - [TCP/IP Settings] - [TCP/IP Settings] page allows you to con-
figure the following items. For more information on these TCP/IP settings,
refer to chapter 7, "Network Printing"
Item Description
[TCP/IP] Select whether or not to make a connection via
TCP/IP.
Choices: [Enable], [Disable]
Default: [Enable]
Configuration menu equivalent:
[Admin Settings] - [Ethernet] - [TCP/IP] -
[Enable]
[LPD] Select whether or not LPD is used.
Choices: [Enable], [Disable]
Default: [Enable]