Limiting users of this machine (LDAP authentication)6-34
[Server Address] Specify the LDAP server
address.
Format: *.*.*.* (The aster-
isks (*) indicate numbers
between 0 and 255.)
If the DNS server has
already been configured,
enter the host name
instead.
If IPv6 is being used, spec-
ify the IPv6 address.
Server address
[Port Number] Type in the port number.
Default: 389
[Search Base] Specify the starting point for
searching directories in the
LDAP server. (up to 255
characters)
Searches are performed by
also including the sub-direc-
tories of the specified start-
ing point.
[Timeout] Specify the length of time
until the LDAP search times
out.
[Authentication
Method]
Select the authentication
method for logging on to the
LDAP server.
Select the same authentica-
tion method as that used on
the LDAP server.
Server authentica-
tion method
[Search Attribute] Specify the attributes to be
used to search for user
accounts. (up to 64 charac-
ters; The only symbol
allowed is a hyphen (-).)
Item Description Preliminary inquiry
To Next Page
Loading...
