Configuring the Printer8-18
[Interface Information]
The [System] - [Device Information] - [Interface Information] window provides
the following information.
Item Description
Protocol
Information
[TCP/IP] If [Enable] is displayed, TCP/IP is enabled.
If [Disable] is displayed, TCP/IP is disabled.
[SMTP] If [Enable] is displayed, SMTP is enabled.
If [Disable] is displayed, SMTP is disabled.
[POP] If [Enable] is displayed, POP is enabled.
If [Disable] is displayed, POP is disabled.
[LDAP] If [Enable] is displayed, LDAP is enabled.
If [Disable] is displayed, LDAP is disabled.
[IPP] If [Enable] is displayed, IPP is enabled.
If [Disable] is displayed, IPP is disabled.
To Next Page
Loading...
Need help?
General
