Configuring the Printer8-60
[SSL/TLS Settings]
The [Security] - [PKI Settings] - [SSL/TLS Settings] page allows you to config-
ure the following items.
Item Description
[SSL/TLS] Select the SSL transmission mode.
Default: [Enable]
[Encryption Strength] Select the SSL encryption strength.
Choices: [AES-256], [AES-256, 3DES], [AES-256,
3DES, RC4-128], [AES-256, 3DES, RC4-128, DES,
RC4-40]
Default: [AES-256, 3DES, RC4-128, DES, RC4-40]
To Next Page
Loading...
