Olivetti d-COLORMF3000 - Page 341

Configuring the Printer 8-79
[IPsec SA Settings] ([Edit])
The [Security] - [IPsec] - [IPsec] - [IPsec SA Settings] - [Edit] page allows you
to configure the following items.
Item Description
[No.] Displays the number to be registered.
[Security Protocol] Select the security protocol.
Choices: [AH], [ESP], [ESP & AH]
Default: [AH]
[Encryption Algorithm
for ESP]
When [Security Protocol] is set to [ESP], select the
ESP encryption algorithm.
Choices: [None], [DES-CBC], [3DES-CBC],
[AES-CBC], [AES-CTR]
Default: [None]
[Authentication Algo-
rithm for ESP]
When [Security Protocol] is set to [ESP], select the
ESP authentication algorithm.
Choices: [None], [MD5], [SHA-1]
Default: [None]