Olivetti d-COLORMF3000 - Using IC Card Authentication Device

Configuring the Printer8-106
[Tray2] [Paper Size] Specifies the setting for the size of paper
loaded into Tray 2.
Default: [Letter] (120V model)
[A4] (other model)
Configuration Menu Equivalent:
[User Settings] - [Printer
Settings] - [Paper Settings] -
[Paper Tray Settings] - [Tray2] -
[Paper Size]
[Width] Specifies the paper width when [Paper
Size] is set to [Custom Size].
Range: 3.63 - 8.50 (inch) /
92 - 216 (mm)
Configuration Menu Equivalent:
[User Settings] - [Printer
Settings] - [Paper Settings] -
[Paper Tray Settings] - [Tray2] -
[Custom Size] - [Width]
[Length] Specifies the paper length when [Paper
Size] is set to [Custom Size].
Range: 5.83 - 11.69 (inch) /
148 - 297 (mm)
Configuration Menu Equivalent:
[User Settings] - [Printer
Settings] - [Paper Settings] -
[Paper Tray Settings] - [Tray2] -
[Custom Size] - [Length]
[Paper Type] Specifies the setting for the type of paper
loaded into Tray 2.
Choices: [Any], [Plain Paper], [Recycled],
[Thick 1], [Thick 2], [Label],
[Postcard], [Letterhead], [Glossy
1], [Glossy 2], [Single Side Only],
[Special Paper]
Default: [Plain Paper]
Configuration Menu Equivalent:
[User Settings] - [Printer
Settings] - [Paper Settings] -
[Paper Tray Settings] - [Tray2] -
[Paper Type]
Item Description