Configuring the Printer 8-109
" The settings on this page can be changed only if the user has logged
on to Administrator mode.
Item Description
[Tray Mapping Mode] Select whether or not the Tray Mapping function is
used.
Choices: [On], [Off]
Default: [Off]
Configuration Menu Equivalent:
[User Settings] - [Print Settings] - [Paper
Settings] - [Tray Mapping] - [Tray Mapping
Mode]
[Logical Tray 0-9] Select the tray that is used for printing when a print
job is received from another manufacturer’s printer
driver.
The default setting for [Logical Tray 1] is [Physical
Tray1]. The default setting for all other trays is
[Physical Tray2].
Choices: [Physical Tray1], [Physical Tray2],
[Physical Tray3], [Physical Tray4]
Configuration Menu Equivalent:
[User Settings] - [Print Settings] - [Paper
Settings] - [Tray Mapping] - [Logical Tray
0-9]
" [Physical Tray3] and [Physical Tray4] appear
only if an optional lower feeder unit is
installed.
To Next Page
Loading...
