Configuring the Printer8-114
[PostScript Settings]
The [Print] - [Default Settings] - [PostScript Settings] window allows you to
configure the following items:
" The settings on this page can be changed only if the user has logged
on to Administrator mode.
Item Description
[PostScript
Settings]
[Wait Timeout] Specify the length of time until Postscript
times out. "0" means that no timeout con-
trol is applied.
Range: 0 to 300 (seconds)
Default: [0]
Configuration menu equivalent:
[Admin Settings] - [Print Set-
tings] - [Emulation] - [Postscript]
- [Wait Timeout]
To Next Page
Loading...
