Configuring the Printer8-178
[RAW Port Settings]
The [Network] - [TCP/IP Settings] - [RAW Port Settings] page allows you to
configure the following items. For more information on these TCP/IP settings,
refer to chapter 7, "Network Printing"
[NTP Server Auto-
matic Acquisition]
Select whether or not the NTP server address is
automatically acquired from the DHCPv6 server to
overwrite the current setting.
Choices: [Enable], [Disable]
Default: [Enable]
Item Description
[RAW Port] Select whether or not a RAW port is used.
Choices: [Enable], [Disable]
Default: [Enable]
Configuration menu equivalent:
[Admin Settings] - [Ethernet] - [TCP/IP] -
[RAW Port]
Item Description
To Next Page
Loading...
Need help?
General
