Configuring the Printer 8-195
The [Network] - [IPP Settings] - [IPP Settings] page allows you to configure
the following items. For details on IPP settings, refer to chapter 7, "Network
Printing" In order to apply the settings, the printer must be turned off, then on
again after the settings have been specified.
Item Description
[IPP Print] Select whether or not to use IPP.
Choices: [Enable], [Disable]
Default: [Enable]
Configuration menu equivalent:
[Admin Settings] - [Ethernet] -
[TCP/IP] - [IPP]
[Accept IPP Job] Select whether or not to accept IPP jobs.
Choices: [Enable], [Disable]
Default: [Enable]
[Printer Name] Specify the printer's name.
Range: Up to 127 characters
Default: Color MF30-1(xx:xx:xx)
[Printer Location] Specify the printer's location.
Range: Up to 127 characters
Default: [Blank]
[Printer Information] Specify the printer information.
Range: Up to 127 characters
Default: [Blank]
" Specify the settings from the
[System] - [Machine Settings]
page.
To Next Page
Loading...
