Configuring the Printer8-204
[priv-pas
sword]
Select [Change Password] to change the
password.
Specify the read-only user password to be
used for privacy (encryption).
Range: 8 to 32 characters
Default: [PrivPassword]
[Write User Name] Specify the reading/writing user name.
Range: Up to 32 characters
Default: [restrict]
" The same name cannot be set for
[Discovery User Name] and [Write
User Name].
[Secu-
rity
Level]
Select the security level for a reading/writ-
ing user.
Choices: [None], [Auth-password],
[Auth-password/Priv-password]
Default: [Auth-password/Priv-password]
[auth-pa
ssword]
Select [Change Password] to change the
password.
Specify the reading/writing user password
to be used for authentication.
Range: 8 to 32 characters
Default: <Mac address> (excluding
colons)
[priv-pas
sword]
Select [Change Password] to change the
password.
Specify the reading/writing user password
to be used for privacy (encryption).
Range: 8 to 32 characters
Default: <Mac address> (excluding
colons)
Item Description
To Next Page
Loading...
