Configuring the Printer 8-207
[SMB Client Settings]
The [Network] - [SMB Settings] - [SMB Client Settings] page allows you to
configure the following items.
Item Description
[SMB Client] If [Enable] is selected, the SMB client function is
enabled.
Choices: [Enable], [Disable]
Default: [Enable]
[NTLM] Select the NTLM version.
Choices: [v1], [v2], [v1/v2]
Default: [v1]
[DFS] To perform SMB transmission in a distributed file
system (DFS) environment, select [Enable].
Choices: [Enable], [Disable]
Default: [Enable]
To Next Page
Loading...
