Configuring the Printer8-220
Item Description
[OpenAPI] Select whether or not OpenAPI is used.
Choices: [Enable], [Disable]
Default: [Enable]
[Port Number] Specify the port number.
Range: 1 to 65535
Default: [50001]
" The currently used port number
cannot be specified.
[SSL/TLS] Select whether or not SSL/TLS is used.
Choices: [Non-SSL Only], [SSL Only],
[SSL/Non-SSL]
Default: [Non-SSL Only]
[Port Number (SSL/TLS)] Specify the SSL port number.
Range: 1 to 65535
Default: [50003]
" The currently used port number
cannot be specified.
[Authentication] Select whether or not to perform OpenAPI
authentication.
Choices: [On], [Off]
Default: [Off]
[Login Name] Type in the login name used with
OpenAPI authentication.
Default: [Blank]
[Password] Select [Change Password] to change the
password.
Type in the password used with OpenAPI
authentication.
Default: [Blank]
To Next Page
Loading...
Need help?
General
