Preparation
BASIC OPERATION GUIDE 2-15
Registering the Default Gateway
Continue from the previous Step 3 to register the Default Gateway.
NOTE: If you are not sure of the appropriate Default Gateway address,
contact your Network Administrator.
1
Access the TCP/IP Setting screen.
2
Press S or T to select Gateway
and press [Enter].
3
Enter the Gateway address using
the same procedure used for the
IP Address in steps 8 - 9 of IP
Address Setting.
Press [Enter] when the entire address has been entered.
4
When you have entered all the
network settings, press [Reset].
The Printer Basic screen displays.
IP Address
Subnet Mask
TCP/IP Setting
Gateway
Gateway
0 0..00.
To Next Page
Loading...
