Basic Operation
3-12 BASIC OPERATION GUIDE
Split Mode
Use this mode to produce one-
sided copies from two-sided or
double-page spread originals, for
example a magazine or book.
The following Split Modes are available:
Original Copy
2
1
21
2
1
1
2
Mode Description
2 sided ¼ 1 sided One-sided copies are produced from two-sided originals.
The following Original Stitch Side options are available:
• Left Side Æ Binding edge at left of originals: The images on
the second side of the originals are copied without rotation
to ensure correct image orientation on output copies.
• Top Side Æ Binding edge at top of originals: The images on
the second side of the originals are rotated 180 degrees to
ensure correct orientation on output copies.
Book ¼ 1 sided One-sided copies are produced from a double-page spread
original, for example a magazine or book.
NOTE: The original sizes that can be used are A3, B4, A4R,
B5R, A5R, 11 × 17" (Ledger) and 8
1/2 × 11" (Letter). The
paper sizes are limited to 11 × 8
1/2" for inch specifications and
A4, and B5 for metric specifications.
The paper size can be changed and the zoom ratio adjusted to
fit the size of the paper.
Original Copy
2
1
1
2
2
1
21
To Next Page
Loading...
