Olivetti d-Copia 16MF User Manual

Basic Operation
3-2 BASIC OPERATION GUIDE
Basic Copying Procedure
1
Open the main power switch
cover on the right side of the
machine and press the Power
Switch to On ( | ).
At the end of warm-up, the Start
indicator lights.
2
Open the Original Cover and
place the original face-down onto
the Platen. Align the original flush
up against the left rear corner of
the Platen.
NOTE: If the optional Document Processor is installed on your machine,
refer to Document Processor, on page 4-3.
3
Select the paper required.
If Auto displays, copy paper the
same size as the original is
automatically selected.
Press [Paper Select] to change
the paper selection.
NOTE: To disable the Auto Paper Selection function. Refer to Chapter 3,
Advanced Operation Guide.
You can specify which cassette will be automatically selected. For details,
refer to Chapter 3, Advanced Operation Guide.
Auto
1
100%
Ready to copy.
Auto

Olivetti d-Copia 16MF Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (A4/Black)	16 ppm
Print Resolution	600 x 600 dpi
Copy Speed	16 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Memory	32 MB
Paper Input Capacity	250 sheets
Paper Output Capacity	100 sheets
Supported Paper Sizes	A4, A5, B5
Connectivity	USB 2.0