Olivetti d-Copia 16MF - Clearing a Staple Jam

Optional Equipment
BASIC OPERATION GUIDE 4-11
5
Insert the Staple Holder back into
the stapler unit. The holder should
click into place when inserted
correctly.
6
Close the Stapler Front Cover.
Clearing a Staple Jam
1
Remove the Staple Holder, refer
to Adding Staples, on page 4-10.
Using Knob A on the Staple
Holder face plate, raise the plate.
2
Remove the jammed staple from
the end where the staples are fed.
3
Lower the Staple Holder face
plate back to its original position.
A