Olivetti d-Copia 16MF - Multi-Bypass Tray Size and Type

Preparation
BASIC OPERATION GUIDE 2-7
Multi-Bypass Tray Size and Type
Use the following instructions to set the paper size and type prior to using
the Multi-Bypass Tray.
Paper Size
The following paper size options are available for the Multi-Bypass Tray:
• Regular Paper Size - these standard paper sizes can be selected from
the Bypass Paper Size menu.
• Other Regular Size - use this option for additional standard paper
sizes.
• Input Size - use this option to enter a custom paper size if your paper
size is not displayed.
• Universal Size - use this option if the paper size is unknown or no
paper size setting is required.
Regular Paper Size:
The following regular paper sizes are available:
• Inch Specification — 11 × 17" (Ledger), 8 1/2 × 14" (Legal), 8 1/2 ×13"
(Oficio II), 8
1/2 × 11" (Letter), 11 × 8 1/2", 5 1/2 ×81/2" (Statement),
A4R, A4
• Metric Specification — A3, B4, A4R, A4, B5R, B5, A5R, B6R, A6R,
8
1/2 × 11" (Letter), 11 × 8 1/2", Folio.
1
Press [System Menu / Counter].
2
Press S or T to select Bypass
Setting and press [Enter].
3
Press S or T to select the paper
size required and press [Enter].
The Bypass Paper Type screen
displays. Select the Paper Type
required using the instructions on page 2-9.
End
System Menu / Counter:
Language
Bypass Setting
Bypass Paper Size:
Input Size