Optional Equipment
BASIC OPERATION GUIDE 4-5
2
Arrange the originals in order and
place face up on the Original
Table. Slide the leading edge of
the originals into the Document
Processor, as far as they will go.
IMPORTANT: To avoid jams,
ensure originals do not exceed the
level indicator on the inside of the
rear insert guide.
3
To ensure originals delivered to
the Eject Table do not fall out,
open the Ejection Extension when
using larger sized originals such
as A3, B4, 11 × 17" (Ledger), and
8
1/2 × 14" (Legal).
IMPORTANT: When copying 2-
sided originals, the originals are
temporarily ejected onto the
Ejection Tray in order to turn them over. Do not touch them at this point.
Any attempt to remove them may cause the originals to jam.
To Next Page
Loading...
