Maintenance
5-6 BASIC OPERATION GUIDE
4
Turn the Toner Container Release
Lever (A) to the left and pull out
the Toner Container.
5
Place the used Toner Container
and the used Waste Toner Box in
the plastic bags provided for
disposal.
6
Hold the charger cleaner rod and
gently pull it out as far as it will go,
then push it back in again.
Repeat this operation two or three
times.
IMPORTANT: Do not use
excessive force to pull out the rod
or attempt to pull it out completely.
NOTE: To ensure best copy quality, it is recommended this cleaning task
is performed at least once a month.
7
Remove the Grid Cleaner from its
packaging and remove the cap.
A
To Next Page