ENGLISH
21
PAYMENT MEDIA STATUS
For payment media programming, you can specify a
4-digit status for each of the media types.
Media Types
1 = Cash
2 = Check
3 = Charge card
4 = Credit card 1
5 = Credit card 2
The 4-digit status consists of [HDLO] and flags for
[Specify Tender Amount], [Change Given] and
[Drawer Open].
NOTE: The Change option setting applies to all
types of payment media excluding cash
(Change Given is always enabled for this
type of payment).
To program the payment media:
1. Control lock key position: PRG.
2. Specify the [1-digit Media Type] and press .
3. Enter the [4-digit Status].
4. Press .
Example: For check payment media, define a high-digit
lock out of 6 (9999.99), with non-compulsory entry of
tender amount, change given and drawer open
disabled.
Type/Press:
PROGRAMMING IN-STORE EMBEDDED
PRICE BARCODES
The barcode reader must be able to read 8- or 13-digit
EAN/UPC barcodes. EAN/UPC codes read from a
product barcode label represent a standard numbering
structure that identifies the product being sold.
The barcode with embedded price of an article has a
specific structure that depends on the country in which
it will be used and to the EAN/UPC code you wish to
use. You can program up to 10 different barcode
configurations.
The following parameters need to be defined to
program your barcode:
To program an in-store price barcode:
1. Control lock key position: PRG.
2. Enter your in-store code [1 to 10] that identifies the
configuration of the barcode that you are
programming.
3. Press .
4. Enter the code type [0 or 1].
5. Enter the max. 3-digit country-specific code prefix
[000 to 999]. Three digits must always be used;
for example, to define a prefix of 24, enter
[024].
6. Enter the number of digits [1 to 3] that the country-
specific code prefix consists of. For example, if your
code prefix is 24, enter [2].
7. Enter the number of digits [1 to 8] that the price
incorporated in the bar code consists of.
8. Define whether to use a price check digit or not.
9. Enter the currency identifier [1 to 4].
10. Press .
High Digit Lock Out Specify Tender Amount
0 = No HDLO 0 = Not complusory
1 = 0.01 - 0.09 1 = Compulsory
2 = 0.01 - 0.99
3 = 0.01 - 9.99
4 = 0.01 - 99.99
5 = 0.01 - 999.99
6 = 0.01 - 9999.99
Change Given Drawer Open
0 = Enabled 0 = Enabled
1 = Disabled 1 = Disabled
Code Type
Country-specific code prefix
0 = Long (13-digit) 000 - 999
1 = Short (8-digit) (always enter 3 digits)
Code prefix length Price length
1 to 3 digits Max. 8 digits
Check digit Barcode price currency
0 = Disabled 0 = Local
1 = Enabled 1 = Foreign Currency no. 1
2 = Foreign Currency no. 2
3 = Foreign Currency no. 3
4 = Foreign Currency no. 4
Payment media status
Payment type
To Next Page
