Olivetti PR 4 - Page 59

Epson TM-U950 Commands 4-23
ESC c 1 n
Select paper type(s) for command settings
Hexadecimal code: 1B 63 31 n
Range:
n = 1-7
Selects the type of paper for command setting, using
n
as follows:
Bit Off/On Hex Decimal Function
0 Off 00 0 Journal paper roll disabled.
On 01 1 Journal paper roll enabled.
1 Off 00 0 Receipt paper roll disabled.
On 02 2 Receipt paper roll enabled.
2 Off 00 0 Slip paper disabled.
On 04 4 Slip paper enabled.
3-7 - - - Undefined.
Notes:
- If the value of n is out of the specified range, the printer ignores this command.
Default:
n = 7
References:
ESC 2, ESC 3
ESC c 4 n
Select paper sensor(s) to stop printing
Hexadecimal code: 1B 63 34 n
Range:
n = 0-255
Selects the paper sensor(s) used to stop printing when a paper-end is detected, using
n
as follows:
Bit Off/On Hex Decimal Function
0 Off 00 0 Journal near end sensor disabled.
On 01 1 Journal near end sensor enabled.
1 Off 00 0 Receipt near end sensor disabled.
On 02 2 Receipt near end sensor enabled.
2 Off 00 0 Journal sensor disabled.
On 04 4 Journal sensor enabled.
3 Off 00 0 Receipt sensor disabled.
On 08 8 Receipt sensor enabled.
4 Off 00 0 Slip insertion sensor disabled.
On 10 16 Slip insertion sensor enabled.
5 Off 00 0 Slip insertion sensor disabled.
On 20 32 Slip insertion sensor enabled.
6-7 - - - Undefined.