Olympia LCD-9210 User Manual

45
D All the calculation examples in this guide use the Norm 1 format.
Decimal point and separator symbols
You can use the display setup screen (Disp) to define the symbols to be
used for the decimal point and the separator inserted every third digit.
D To change the decimal point and separator symbols, press the
key repeatedly until the setup screen illustrated below appears.
Disp
1
D Display the setup screen.
D Press the digit key ( or ) corresponding to the required
setting.
(point): Decimal point; comma as separator
(comma): Decimal comma instead of point; point as separator
Initialising the calculator
Press the following sequence of keys to initialise calculation mode and the
setup, and to clear the replay memory and variables.
(All)
Basic Calculations
Note!
Use the
key to activate COMP mode in order to carry out basic
calculations.
COMP:
Arithmetic calculations
D Negative values in calculations must be enclosed in parentheses. For
details, refer to “Sequence of operations”.
D Negative exponents need not be enclosed in parentheses.
sin 2.34 x 10
-5
³ 2.34 5
Example 1:
3x(5x10
-9
)
3
5 9
Example 2: 5x(9+7)
5
9 7
D You can leave out all operations prior to the key.
1.5
-08
80.

Olympia LCD-9210 Specifications

General

Power source	Battery/Solar
Type	Scientific
Wrist rest	No
Form factor	Pocket
Control type	Buttons
Product color	Silver
Housing material	Plastic
Storage media type	-
Digits	12 digits
Display type	LCD
Display size (HxV)	60 x 17.5 mm
Display number of lines	2 lines
Package type	Box
Package depth	115 mm
Package width	225 mm
Package height	37 mm
Package weight	250 g
Harmonized System (HS) code	84701000

Weight and Dimensions

Depth	18 mm
Width	84 mm
Height	162 mm
Weight	110 g