87
Common
Problem Cause Remedy Page
i ) Auto scale switching does not
work.
The objective magnifications are not
input or set erroneously.
Input the magnifications of the objec-
tives in use.
The code revolving nosepiece is not
connected to the control box for coded
units.
Connect the coded revolving nose-
piece to the control box for coded units.
64
k) Functions interlocked with micro-
scope operations do not work.
Cables are connected improperly. Connect the cables of the microscope,
control box for coded units and DP21
correctly.
The control box for coded units is not
recognized.
Set the main switches of the control
box for coded units and DP21-CB, and
set the switches to ON in order of: 1)
control box; 2) DP21-CB.
61,62
64
64
To Next Page
Loading...
