Olympus DP21 - Default: off; Scale Display Range Setting; Default: LIVE & SNAP; Image Orientation Setting

37
SAL System
³ Enter the objective power and its Memory No. (enter for each revolving nosepiece position).
5
Scale Display Range Setting
Default: LIVE & SNAP
When the scale display is ON, it can be displayed in either way below.
@To display the scale in both live and recorded images.
²To display the scale only in the live image (the scale is not displayed in
the recorded images).
}This setting is also applied to the measurement-related display.
@
²
6
Image Orientation Setting
Default: Erect
The image can be displayed in one of the four orientations. This opera-
tion is not available in the middle of recording.
Erect
180° rotated
Left/right inverted
Up/down
inverted
7
Focusing indicator Setting
Default: OFF
The focusing indicator and focusing area can be displayed or hidden.
@To hide both the focusing indicator and focusing area.
²To display only the focusing indicator.
³To display both the focusing indicator and focusing area.
@
²
³